StreamBox Beagleboard Last changed: 2009/07/21 08:57
Main page / Recent changes go back \| refresh \| help \| Pages Index \| create a page \| upload \| What links here? \| locusonus.org	Show source / Syntax / History
{include:subpage streambox} {tags:StreamBox} !StreamBox on a BeagleBoard ''''%Alejo Duque%'''' A parallel track to the streambox on the alix board to be found here: [StreamBox Alix v.0.1] [http://farm4.static.flickr.com/3002/3116819250_d05d86fbae.jpg] !First Boot! !!notes on the process: Dad to buy a null modem cable and a hdmi video cable (but still need a monitor able to do hdmi). Followed this partition scheme guideline: http://elinux.org/BeagleBoardBeginners#SD_card_setup Got the narcissus image build for angstrom, failed to boot! {{ Unable to use mmc 0:1 for fatload Wrong Image Format for bootm command ERROR: can't get kernel image! }} Had rename and copy: # mv /media/boot/uImage /media/boot/uImage_ # cp /media/root/boot/uImage-2.6.29-omap1 /media/boot/uImage Then, boot like this: #mmcinit #boot {{ .-------. \| \| .-. \| \| \|-----.-----.-----.\| \| .----..-----.-----. \| \| \| __ \| ---'\| '--.\| .-'\| \| \| \| \| \| \| \| \|--- \|\| --'\| \| \| ' \| \| \| \| '---'---'--'--'--. \|-----''----''--' '-----'-'-'-' -' \| '---' The Angstrom Distribution beagleboard ttyS2 Angstrom 2009.X-test-20090508 beagleboard ttyS2 }} And, to log in just use root, theres no need for a password. !Second boot I had to short pins 5 and 6 of the OTG usb port so to be able to make it behave as a host, this took me a while to figure out since no one on the IRC was helpful enough to even suggest more reading. The solution is somewhow buried inside the pages and is a problem or a bug that hit only revision B, so this means we have a board that is really part of development. Anyways, I got the good luck to be able to solder a little dot between those pins, cut apart 2 USB cables to patch a new one with 2 mini-USB heads so to be able to connect the BeagleBoard with the USB Hub. Apart from this I had to buy an adaptor to feed the Board since the other one i had feeds the USB Hub. Is cable paradise, seems that all the promised portability of the beagleboard got entangled so far. here some code snippets: Listing the connected devices to the usb hub: {{ root@beagleboard:~# lsusb Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0002 Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 002 Device 003: ID 05ac:1402 Apple Computer, Inc. Bus 002 Device 004: ID 1005:b113 Apacer Technology, Inc. Handy Steno 2.0 (256MB) }} There you can see the USB to ethernet adaptor I had to buy so to allow some network connectivity to the board. You can see also a usb memory drive that got mounted automatically by the system. So, finally i was able to ping and log in via ssh via ethernet (before i was logging in via jtag, direct via serial) {{ --- 169.254.8.156 ping statistics --- 12 packets transmitted, 12 received, 0% packet loss, time 11005ms rtt min/avg/max/mdev = 0.241/0.444/0.547/0.095 ms kdag@dspstv:~$ ssh root@169.254.8.156 The authenticity of host '169.254.8.156 (169.254.8.156)' can't be established. RSA key fingerprint is df:b0:f8:c7:b0:83:5c:d6:0b:b7:4d:fb:f3:70:01:1a. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '169.254.8.156' (RSA) to the list of known hosts. root@169.254.8.156's password: root@beagleboard:~# }} Now i will try to configure the beagleboard to export X.. {{ }} !!Hardware Specifications OMAP3530 applications processor featuring the ARM® Cortex™-A8 128MB low-power DDR RAM 256MB NAND flash USB 2.0 high-speed on-the-go port DVI-D output NTSC/PAL TV via S-Video output 6-in-one 8-bit MMC+/SD/SDIO connection Stereo audio in/output JTAG header I2S, I2S, SPI, MMC/SD expansion header Power via USB or alternate jack !!Angstrom http://amethyst.openembedded.net/~koen/narcissus/ http://www.angstrom-distribution.org/demo/beagleboard/ http://www.angstrom-distribution.org/unstable/autobuild/beagleboard/ !!some wiki instructions: http://elinux.org/BeagleBoardHandheldsMojo#Debian_Installer_QEMU_.28hasty-armv5el_or_hasty-armv6el.29 !!shopping list http://code.google.com/p/beagleboard/wiki/BeagleBoardShoppingList !!!! notes from alejo duque, 20/12/2008
	Powered by LionWiki 2.2 2024/12/05 02:05 -- 3.148.108.201 Erase cookies	Show source / Syntax / History

StreamBox Beagleboard

Last changed: 2009/07/21 08:57

Show source / Syntax / History

{include:subpage streambox}
{tags:StreamBox}

!StreamBox on a BeagleBoard
''''%Alejo Duque%''''

A parallel track to the streambox on the alix board to be found here:
[StreamBox Alix v.0.1]

[http://farm4.static.flickr.com/3002/3116819250_d05d86fbae.jpg]

!First Boot!

!!notes on the process:

Dad to buy a null modem cable and a hdmi video cable (but still need a monitor able to do hdmi).

Followed this partition scheme guideline: 
http://elinux.org/BeagleBoardBeginners#SD_card_setup

Got the narcissus image build for angstrom, failed to boot!

{{
** Unable to use mmc 0:1 for fatload **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
}}

Had rename and copy:

# mv /media/boot/uImage /media/boot/uImage_
# cp /media/root/boot/uImage-2.6.29-omap1 /media/boot/uImage

Then, boot like this:
#mmcinit
#boot

{{
.-------.                                                                                                                                        
|       |                  .-.                                                                                                                   
|   |   |-----.-----.-----.| |   .----..-----.-----.                                                                                             
|       |     | __  |  ---'| '--.|  .-'|     |     |                                                                                             
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |                                                                                             
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'                                                                                             
                -'  |                                                                                                                            
                '---'                                                                                                                            
                                                                                                                                                 
The Angstrom Distribution beagleboard ttyS2                                                                                                      
                                                                                                                                                 
Angstrom 2009.X-test-20090508 beagleboard ttyS2

}}

And, to log in just use root, theres no need for a password.

!Second boot

I had to short pins 5 and 6 of the OTG usb port so to be able to make it behave as a host, this took me a while to figure out since no one on the IRC was helpful enough to even suggest more reading. The solution is somewhow buried inside the pages and is a problem or a bug that hit only revision B, so this means we have a board that is really part of development.

Anyways, I got the good luck to be able to solder a little dot between those pins, cut apart 2 USB cables to patch a new one with 2 mini-USB heads so to be able to connect the BeagleBoard with the USB Hub. Apart from this I had to buy an adaptor to feed the Board since the other one i had feeds the USB Hub.

Is cable paradise, seems that all the promised portability of the beagleboard got entangled so far.

here some code snippets:

Listing the connected devices to the usb hub:

{{
root@beagleboard:~# lsusb 
Bus 001 Device 001: ID 1d6b:0002  
Bus 002 Device 001: ID 1d6b:0002  
Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 003: ID 05ac:1402 Apple Computer, Inc. 
Bus 002 Device 004: ID 1005:b113 Apacer Technology, Inc. Handy Steno 2.0 (256MB)
}}

There you can see the USB to ethernet adaptor I had to buy so to allow some network connectivity to the board. You can see also a usb memory drive that got mounted automatically by the system.

So, finally i was able to ping and log in via ssh via ethernet (before i was logging in via jtag, direct via serial)

{{
--- 169.254.8.156 ping statistics ---
12 packets transmitted, 12 received, 0% packet loss, time 11005ms
rtt min/avg/max/mdev = 0.241/0.444/0.547/0.095 ms
kdag@dspstv:~$ ssh root@169.254.8.156
The authenticity of host '169.254.8.156 (169.254.8.156)' can't be established.
RSA key fingerprint is df:b0:f8:c7:b0:83:5c:d6:0b:b7:4d:fb:f3:70:01:1a.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '169.254.8.156' (RSA) to the list of known hosts.
root@169.254.8.156's password: 
root@beagleboard:~# 
}}

Now i will try to configure the beagleboard to export X..

{{

}}

!!Hardware Specifications

OMAP3530 applications processor featuring the ARM® Cortex™-A8
128MB low-power DDR RAM
256MB NAND flash
USB 2.0 high-speed on-the-go port
DVI-D output
NTSC/PAL TV via S-Video output
6-in-one 8-bit MMC+/SD/SDIO connection
Stereo audio in/output
JTAG header
I2S, I2S, SPI, MMC/SD expansion header
Power via USB or alternate jack

!!Angstrom

http://amethyst.openembedded.net/~koen/narcissus/

http://www.angstrom-distribution.org/demo/beagleboard/
http://www.angstrom-distribution.org/unstable/autobuild/beagleboard/

!!some wiki instructions:

http://elinux.org/BeagleBoardHandheldsMojo#Debian_Installer_QEMU_.28hasty-armv5el_or_hasty-armv6el.29

!!shopping list

http://code.google.com/p/beagleboard/wiki/BeagleBoardShoppingList

!!!! notes from alejo duque, 20/12/2008

Show source / Syntax / History